Oscillations Conical surface Cylindrical surface A machine AS370-K for MIG/MAG-surfacing of cylindrical and conical surfaces.

    AS370-K intends for automatic MIG/MAG-surfacing of cylindrical and conical outside and inside surfaces.

    The surfacing can be done with or without oscillation by a spiral.

    AS354-5000 consists of:
  1. A frame;
  2. A mechanism of the linear movement of the torch (X);
  3. A mechanism of the linear movement of the torch (Z);
  4. A rotator of product;
  5. A movable clamp of a product;
  6. A movable support of a product, 2 pcs.;
  7. A control system;
  8. An operating console;
  9. A set of welding equipment;
  10. Pneumoapparatus etc.

    AS370-K peculiarities: An operating console
  1. A compact operating console;
  2. Contouring control of the movement of the torch along a linear path (forming a cylindrical or conical surfaces) with the required linear velocity of the tool and the circumferential speed of the detail, and parameters of torch oscillating;
  3. The programming of the pathes "point to point", ie. the movement of the torch with a portable remote control at the beginning and end of the weld area, and automatic recording of the coordinates of these points in the controllers memory;
  4. A forming of 9 couples of coordinates for surfacing;
  5. A forming of 9 modes of a surfacing;
  6. Simultaneous control of 2 servo torch drivers and rotary drive of the product;
  7. A smooth control of welding parameters;
  8. A "hot" editing of parameters (speed, step,amplitude and period of oscillation, delay the torch at the extremes of the oscillation);
  9. A quick set readjustment for welding of details with different sizes.