Bench for MIG/MAG welding of longitudinal seams of thin-walled tubes

The bench AS308 intends for automatic MIG/MAG welding of longitudinal joints of thin-walled tubes from low-alloyed steels up to 1000 mm long, diameter - 100-600 mm, thickness of metal - 1.4...3.0 mm.

The bench AS308, together with machines AS305-1 or AS349 and AS305-2 forms a SET for the MIG/MAG welding of different types of fire-extinguishers balloons.

Bench AS308-2 for MIG/MAG-welding of longitudinal seams of thin-walled tubes

Bench AS308-2 intend for automatic MIG / MAG welding "downhill" of longitudinal seams of thin-walled pipes made of low-alloy steels up to 500 mm long, 100-500 mm in diameter with a pipe wall thickness of 1.0 ... 3.0 mm.

Welding is performed "downhill". Console tilt angle - 30 degrees.

Machine for TIG-welding of longitudinal seams

Machine AS311 intend  for mechanized TIG-welding of longitudinal seams of hull products with dimensions up to 600 x 600 mm made of steel or aluminum and its alloys.

Machine for TIG welding of longitudinal seams of thin-walled tubes

Machine AS318 intends for automatic TIG welding of longitudinal joints of thin-walled tubes from low-alloyed and stainless steels up to 400 mm long, diameter - 42-120 mm, thickness of metal - 0.5...1.5 mm.

Welding is carried out without and with filler wire feed as well.

Machine AS325 for automatic MIG / MAG welding of longitudinal seams

Machine AS325 intends for automatic MIG / MAG welding of longitudinal seams of convective channels made of low-carbon and low-alloy steels 160, 210 and 260 mm long assembled in a package up to 520 mm long with a wall thickness of 1.5 - 2.0 mm.

Bench AS333 for automatic TIG welding with or without filler wire longitudinal joints of thin-walled tubes

The bench AS333 intends for automatic TIG welding with or without filler wire longitudinal joints of thin-walled tubes from low-alloyed and stainless steels up to 1000 mm long, diameter - 90-600 mm, thickness - 0.5...1.5 mm.
The bench welds sheet metal as well.

Machine AS336 for automatic MIG / MAG welding of longitudinal seams

Machine AS336 intends for automatic MIG / MAG welding of longitudinal seams of smoke tubes made of low-carbon and low-alloy steels up to 500 mm long, with a wall thickness of 1.2 - 3.0 mm.

Machine AS364 for multipass MIG/MAG welding of detailes of railroad points with length up to 1500 mm

Machine AS364 intends for multipass MIG/MAG welding of detailes of railroad points.

A length of seam - up to 1500 mm.

Welding - multipass with alternately performing root, filling and facing seams.

Programmable layout of seams.

Canting the product in a comfortable position for welding.

The welding of filling and facing seams are with torch weaving.

Two-position machine AS411 for TIG-welding of longitudinal seams

Two-position machine AS411  intends for automatic TIG welding of several shells of parts of automobile air heaters with a diameter of 40 to 80 mm, assembled in a package, with longitudinal seams with a total length of the package up to 300 mm.

Welding can be carried out with or without filler wire feed.

The machine combines the operations of loading and unloading parts at one position with their simultaneous welding at the second position. Position change time - 3 seconds.

A line of machines AS337-AS338 for welding of small part detailes

The machines AS337-AS338 intend for automatic MIG/MAG welding of small part details from low-alloyed steels.
Machines of this product line are produce welding of longitudinal and one or two circular seams as well.
Each machine is a completed cell with walls and a sliding door that protect staff from detrimental effects of welding arc and foul gases.
An exhaust ventilation assembles on the top of the cell.