Machine AS313 for TIG-welding of circular seams with small diameters

AS313 intends for automatic TIG welding of circular seams with diameters 4 ... 20 mm.

A line of machines AS337-AS338 for welding of small part detailes

The machines AS337-AS338 intend for automatic MIG/MAG welding of small part details from low-alloyed steels.
Machines of this product line are produce welding of longitudinal and one or two circular seams as well.
Each machine is a completed cell with walls and a sliding door that protect staff from detrimental effects of welding arc and foul gases.
An exhaust ventilation assembles on the top of the cell.

Machine AS381 for MIG/MAG welding of circular seams

AS381 intends for MIG/MAG welding of circular seams of filter detailes.

Material - low carbon steel. A nozzle diameter - 8 mm.

Machine AS399 for TIG-welding of circular seams

AS399 intends for automatic TIG-welding of circular seams with horizontal or inclined to the 900 axis of rotation of pipe connections with diameter 30 ... 160 mm, length up to 400 mm, thickness 0.8 ... 2.0 mm.

Welding can be performed without or with wire feeding.

Machine for TIG-welding of circular seams

AS399-C1 intends for automatic TIG-welding of circular seams with vertical axis of rotation of pipe connections with diameter 30 ... 90 mm, length up to 150 mm, thickness 0.8 ... 1.5 mm.

Welding can be performed without or with wire feeding.

Two-position machine AS399-C2 for TIG-welding of circular seams by two torches

Two-position machine AS399-C2 intends for alternate or simultaneous TIG welding of products with two continuous or discontinuous circular welds with a diameter of -42 ... 81 mm, a length of 20 ... 141 mm, a thickness of 1.0 and 1.5 mm with filler wire feed.

Welding is performed with two torches while rotating the product about the vertical axis.

The machine combines the operations of loading and unloading parts at one position with their simultaneous welding at the second position. Position change time - 3 seconds.

Two position machine AS399-C4 for TIG-welding of circular and saddle seams

AS399-C4 intends for automatic TIG-welding of the circlar or saddle seam of the connection of a 10-50 mm boom with a body with a diameter of 30 or 100 mm, in particular, parts of automobile air heaters.

Welding can be without or with filler wire feed as well.

The machine combines the operations of loading and unloading parts at one position with their simultaneous welding at the second position. Position change time - 3 seconds.

Machine AS399-C5 for TIG-welding of circular seams

Machine AS399-C5 intends for TIG-welding of products with circular seams of joints (type C1 in accordance with GOST 14771-76) of tubes with a tube plate. The diameter of the tubes is 25 ... 38 mm, the wall thickness is 1.5 mm, the dimensions of the board are 165 mm, the thickness is 1.5 mm.

Welding is performed when the product rotates about the vertical axis of the pipe being welded.

Two-position machine AS411 for TIG-welding of longitudinal seams

Two-position machine AS411  intends for automatic TIG welding of several shells of parts of automobile air heaters with a diameter of 40 to 80 mm, assembled in a package, with longitudinal seams with a total length of the package up to 300 mm.

Welding can be carried out with or without filler wire feed.

The machine combines the operations of loading and unloading parts at one position with their simultaneous welding at the second position. Position change time - 3 seconds.

Machine AS420 for automatic MIG/MAG welding of two circular seams of rotatable joints

AS420 intends for automatic MIG/MAG simultaneous welding of two circular seams of rotatable joints from low-alloyed steels by the diameter 20-200 mm with lengs up to 800 mm, particularity, welding of the bottom and flange of the boiler heater flask

A machine AS420, together with machines 421 forms a SET for the MIG/MAG welding of the boiler heater flask.

A machine AS420 can be used for:
- MIG/MAG or TIG welding;
- simultaneous or sequential welding with two torches;
- witout or with weaving of torches;
- with mechanical copying of the weld line.

Machine AS421 for automatic TIG-welding of circular seams of rotatable joints

AS420 intends for automatic TIG-welding of circular seams of rotatable joints by the diameter 10-100 mm.

Welding is performed with the rotation of the product about the vertical axis.